Import tempered glass Film from Japan at wholesale prices

■ ultra-thin 0.26mm
0.26mm, made of tempered glass, rugged thin.

■ realized 2.5D round edge processing round edge processing that the smooth edge that was both elegant appearance and hold feeling as if it is a terminal body and integral.

■ hardness 9H
In 9H hardness protection, support gently terminal, also prevents strong scratch.

■ difficult also contains air bubbles when you stick to a hard body that contains the bubble, you stick them with confidence for anyone who wants weak film paste is.

■ By pasting prevent glass scattering, not scatter debris be broken by any chance glass, it is safe.

■ Anti-Fingerprint
Oil on the surface, fingerprints, dust, etc., dirt is also easy to wipe off the coating is applied as had attached to the screen. In addition there is automatic adsorption function, it will exit automatically adsorbed bubble just by pressing lightly with a finger.

【installation method】
1. Wipe clean the screen of the smartphone using the cleaner, to remove dust and fingerprints.

2. Removing the release sheet of tempered glass film, and the adhesive surface down to fit the body outer frame.
※ Please note the direction in which the paste.

3. The tempered glass film you down exactly according to the four corners of the liquid crystal surface.

Four. Strengthen the four corners of the glass film and press lightly to confirm whether or not there is a deviation, please re-paste again peeling If you have been shifted.

Five. Once you have verified that the four corners of the film and the terminal screen are overlapped, and press lightly on the center of the tempered glass film, we will gradually film is in close contact with the screen. (We will continue to closely naturally without rubbing)

6. Affixed have not been part of the pressing lightly from the center to the edge, if you had been able to bubble and push outward.

7. If you've made a wave pattern on the surface, or you press a plastic plate, you will not naturally over time.