厂商详情
WAKAI&CO.,LTD
地址 | 1-6-30 Morikawachinishi Higashiosaka-City Osaka, 日本邮编:577-8503 |
---|---|
负责人姓名 | Toshihiro Wakai |
年收 | JPY 13,000,000,000 |
公司人数 | 不显示 |
网址 |
其他人感兴趣的
此类产品中的其他产品
SD商品编号:10404119
详情 | 价格 & 数量 | ||
---|---|---|---|
S4 |
[Nail-it Vessel Electrodra Ball Body 220USB-1
Original text before translation
【単品】ネイルイット ベッセル 電ドラボール 本体 220USB-1
(NIJ0005)
JAN:4907587010711
|
(NIJ0005)
JAN:4907587010711
批发价: 仅限会员
1点/组
有库存
|
|
S5 |
[Nail-it船垫钻头AMD-1.2
Original text before translation
【単品】ネイルイット ベッセル クッションドリル AMD-1.2
(NIJ0006)
JAN:4907587602664
|
(NIJ0006)
JAN:4907587602664
批发价: 仅限会员
1点/组
有库存
|
|
S6 |
[Nail-it船垫钻头AMD-1.0
Original text before translation
【単品】ネイルイット ベッセル クッションドリル AMD-1.0
(NIJ0007)
JAN:4907587602657
|
(NIJ0007)
JAN:4907587602657
批发价: 仅限会员
1点/组
有库存
|
尺寸 |
---|
[丹多拉球产品内容]。
*Electrodra Ball 220USB-1主体1件。 *Bit +2 (100mm) 1件。 *USB充电线(1米) 1个。 *操作手册 [坐垫钻头产品内容] *垫子钻头 (铁工用)No.AMD-1.2(1.2×76)1件 |
商品规格 |
---|
描述
*请务必阅读说明手册。 *请小心短路 *带电作业时请小心触电。 *请小心短路 *带电作业时请小心触电。 *让儿童在家中远离该产品。 *使用具有默认输出等级的充电器(输出:5V-1A)。 使用额定电流较大的充电器会缩短内部电池的寿命。 *在高处工作时,要注意不要掉落钻头或电动螺丝刀。 *使用指定以外的位可能导致位被卡住。 *电动螺丝刀可能会操作并造成伤害。 *如果在操作过程中钻头脱落,可能会造成伤害。 *电源自动关闭后,请不要继续按住开关。 *电源自动关闭后,请不要继续按住开关。 *这样做可能会损害你的眼睛。 *超载可能导致电动螺丝刀的损坏。 *请勿使用电动螺丝刀进行超过说明书中规定的最大手动扭矩的工作。超载可能会损坏电动螺丝刀。 *超载可能会损坏电动螺丝刀。无意中开启可能会造成伤害 *不要用洗涤剂或下面列出的任何化学品擦拭。 (化学品的例子:汽油、稀释剂、酮类(丙酮等)、醚类和其他类似化学品)。 *在发生故障时不要操作开关,否则可能导致火灾或电击。 *如果不这样做,可能会导致受伤、故障、烟雾、火灾或触电。 *请勿拆卸电池或拆除任何部件。 *钻孔后,立即要格外小心,因为钻头会变热,可能会造成灼伤。 *牢牢固定工件,将钻头与工件成直角压紧。 *不要使用冲击式驱动器来施加冲击。 *请注意不要损坏钻头或散落碎片。 *一定要戴上防护眼镜,让你的手和脸远离旋转的切削刃和切屑。 *如果观察到任何异常情况,请立即停止使用。 *请将本品放在远离儿童的地方。 |
更多
配送方法 | 估计到达 |
---|---|
Sea Mail | 从 05月30日 到 08月02日 |
Air Mail | 从 05月14日 到 05月16日 |
EMS | 从 05月13日 到 05月16日 |
Pantos Express | 从 05月15日 到 05月20日 |
DHL | 从 05月13日 到 05月15日 |
UPS | 从 05月13日 到 05月15日 |
FedEx | 从 05月13日 到 05月15日 |
某些交易条件可能仅适用于日本
绳子艺术问题解决了!一个让钉子更容易的工具
[由于钉子的数量很多,所以钉绳艺术很困难。] [钉在木板的边缘,使木板开裂!] 。 电鼓球是解决此类问题的答案。 通过设置电钻球和缓冲钻,你可以为钉子钻出完美的孔!而且你可以减少钉子和劈柴的负担。 邓多拉球配备了2号十字钻头,所以它在组装家具时也非常有用! 我们向每个家庭推荐这把螺丝刀。 *Dendora球不包括垫子钻。 [钻探技巧]。 1.在距钻头(NIJ0006)约10毫米处做标记 钻头可能会穿透木板,损坏桌子等。 用胶带或其他方式提前标记你要钻的深度。 把钻头放在电龙球上,直接钻过去! 如果孔是倾斜的,那么钉子打进去时就会有一个角度。 钻孔时尽量将钻头摆正。 如果钉子偏斜,在打入后用钳子或穿线笔调整。 拔出开关时,请保持按住开关! 当旋转停止时,很难将钻头从木板上拉出来。 从钻孔开始到拔出钻头结束,都要保持开关开启。 当旋转停止时,强行拉出钻头可能导致损坏。 尽管我们尽力在网站上显示最新的产品信息,但由于制造商(VESSEL有限公司)的情况,产品规格可能会有变化,恕不另行通知。然而,我们尽一切努力在网站上显示最新的产品信息,产品规格可能会因制造商(VESSEL有限公司)的情况而发生变化,恕不另行通知。 因此,网站上的产品信息可能与实际交付的产品信息不同,所以请务必检查产品标签和如果您需要更详细的产品信息,请联系制造商。 |
此类产品中的其他产品:
*请小心短路 *带电作业时请小心触电。
*请小心短路 *带电作业时请小心触电。
*让儿童在家中远离该产品。
*使用具有默认输出等级的充电器(输出:5V-1A)。 使用额定电流较大的充电器会缩短内部电池的寿命。
*在高处工作时,要注意不要掉落钻头或电动螺丝刀。
*使用指定以外的位可能导致位被卡住。
*电动螺丝刀可能会操作并造成伤害。
*如果在操作过程中钻头脱落,可能会造成伤害。
*电源自动关闭后,请不要继续按住开关。
*电源自动关闭后,请不要继续按住开关。
*这样做可能会损害你的眼睛。
*超载可能导致电动螺丝刀的损坏。
*请勿使用电动螺丝刀进行超过说明书中规定的最大手动扭矩的工作。超载可能会损坏电动螺丝刀。
*超载可能会损坏电动螺丝刀。无意中开启可能会造成伤害
*不要用洗涤剂或下面列出的任何化学品擦拭。
(化学品的例子:汽油、稀释剂、酮类(丙酮等)、醚类和其他类似化学品)。
*在发生故障时不要操作开关,否则可能导致火灾或电击。
*如果不这样做,可能会导致受伤、故障、烟雾、火灾或触电。
*请勿拆卸电池或拆除任何部件。
*钻孔后,立即要格外小心,因为钻头会变热,可能会造成灼伤。
*牢牢固定工件,将钻头与工件成直角压紧。
*不要使用冲击式驱动器来施加冲击。
*请注意不要损坏钻头或散落碎片。
*一定要戴上防护眼镜,让你的手和脸远离旋转的切削刃和切屑。
*如果观察到任何异常情况,请立即停止使用。
*请将本品放在远离儿童的地方。
*Please be careful of short circuit *Please be careful of electric shock when working with electricity.
*Overloading may cause damage or injury.
*Keep children away from the product at home.
*Use a charger with the default output rating (output: 5V-1A). Use of a charger with a higher current rating will shorten the life of the internal battery.
*When working in high places, be careful not to drop bits or electric screwdrivers. Doing so may cause an accident.
*Using bits other than those specified may cause the bit to become stuck.
*Do not touch the switch when installing* removing bits. The electric screwdriver may operate and cause injury.
*Install the bit securely. If the bit comes off during operation, it may cause injury.
*Do not continue to hold down the switch after the power is automatically turned off. Doing so may damage internal parts.
*Continuous overloading may cause malfunction.
*Do not look directly at the LED light. Doing so may damage your eyes.
*Do not operate the switch when tightening by hand. Overloading may cause damage to the electric screwdriver.
*Do not use the electric screwdriver for work that exceeds the maximum manual torque specified in the instruction manual. Overloading may damage the electric screwdriver.
*Before performing maintenance, changing bits, etc., and when transporting* or storing, make sure the switch is in the center position. Unintentional switching on may cause injury!
*Use reinforced plastic cover. Do not wipe with detergent or any of the chemicals listed below. Doing so may cause cracks, electric shock, or malfunction!
(Examples of chemicals: benzine, thinner, ketones (acetone, etc.), ethers, and other similar chemicals)
*Do not operate the switch in case of malfunction. Failure to do so may result in fire or electric shock.
*Do not disassemble or modify the product by yourself. Failure to do so may result in injury, malfunction, smoke, fire, or electric shock.
*Doing so may cause fire or injury. Do not disassemble the battery or remove any parts.
*Take extra care when drilling immediately after drilling, as the drill will become hot and may cause burns.
*Fix the workpiece firmly and press the drill at a right angle to the workpiece.
*Do not use an impact driver to apply impact.
*Please be careful not to damage the drill or scatter chips.
*Be sure to wear protective goggles and keep your hands and face away from the rotating cutting edge and chips.
*If any abnormality is observed, discontinue use immediately.
*Keep this product away from children at home.