厂商详情
My Case Shop
地址 | 6-27-45 THE KINDAI 20 SHINJUKU Bldg.3F Shinjuku Shinjukuku Tokyo, 日本邮编:160-0022 |
---|---|
负责人姓名 | Ally Won |
年收 | JPY 840,000,000 |
公司人数 | 23 |
网址 | |
SNS |
其他人感兴趣的
此类产品中的其他产品
SD商品编号:6360311
详情 | 价格 & 数量 | ||
---|---|---|---|
S1 |
[iPhone XS Max] 清除
Original text before translation
【iPhone XS Max】クリア
(GL14268i65)
JAN:4589753032682
|
(GL14268i65)
JAN:4589753032682
批发价: 仅限会员
1点/组
有库存
|
|
S2 |
[iPhone XR] 清除
Original text before translation
【iPhone XR】クリア
(GL14266i61)
JAN:4589753032668
|
(GL14266i61)
JAN:4589753032668
批发价: 仅限会员
1点/组
有库存
|
尺寸 |
---|
|
商品规格 |
---|
描述
[Glastar Tempered Glass Film 0.33?]是一款用于全面保护屏幕的钢化玻璃膜,其曲线与设备的圆形边缘相匹配。 *薄 *圆边处理 0.33毫米的高质量玻璃加上圆边处理,使其能够抵抗侧面冲击,触感光滑。 *防碎 玻璃经过特殊处理,即使破裂也不会碎裂,防止对设备本身造成伤害或损害。这是一款注重安全的产品。 *防指纹处理 在钢化玻璃表面涂有防指纹涂层,以防止指纹、灰尘、化妆品等粘附在表面上,并防止防指纹处理 *硬度9H *99.9%的高透明度 [如何安装] 1. 用清洁剂将智能手机屏幕擦拭干净,去除灰尘和指纹。 撕下钢化玻璃膜的离型纸,将其与主机的外框对齐,粘合面朝下。 *注意贴膜的方向。 3. 3. 将钢化玻璃膜准确地与LCD表面的四个角对齐。 4. 如果有任何错位,请将其剥离并重新贴上。 5. 轻轻按下钢化玻璃膜的四个角,检查是否有错位。 *产品规格和设计如有更改,恕不另行通知,以便改进。 |
更多
配送方法 | 估计到达 |
---|---|
Sea Mail | 从 06月19日 到 08月23日 |
Air Mail | 从 06月03日 到 06月05日 |
EMS | 从 05月31日 到 06月05日 |
Pantos Express | 从 06月04日 到 06月07日 |
DHL | 从 05月31日 到 06月04日 |
UPS | 从 05月31日 到 06月04日 |
FedEx | 从 05月31日 到 06月04日 |
某些交易条件可能仅适用于日本 |
此类产品中的其他产品:
*薄 *圆边处理
0.33毫米的高质量玻璃加上圆边处理,使其能够抵抗侧面冲击,触感光滑。
*防碎
玻璃经过特殊处理,即使破裂也不会碎裂,防止对设备本身造成伤害或损害。这是一款注重安全的产品。
*防指纹处理
在钢化玻璃表面涂有防指纹涂层,以防止指纹、灰尘、化妆品等粘附在表面上,并防止防指纹处理
*硬度9H
*99.9%的高透明度
[如何安装] 1.
用清洁剂将智能手机屏幕擦拭干净,去除灰尘和指纹。
撕下钢化玻璃膜的离型纸,将其与主机的外框对齐,粘合面朝下。
*注意贴膜的方向。 3.
3. 将钢化玻璃膜准确地与LCD表面的四个角对齐。
4. 如果有任何错位,请将其剥离并重新贴上。
5. 轻轻按下钢化玻璃膜的四个角,检查是否有错位。
*产品规格和设计如有更改,恕不另行通知,以便改进。
*Thin * Rounded edge processing
0.33mm high quality glass with rounded edge processing makes it resistant to side impact and smooth to the touch.
*Shatterproof
The glass is specially treated so that it will not shatter even if it breaks, preventing injury or damage to the device itself. This is a product that pays attention to safety.
*Anti-fingerprint processing
Anti-fingerprint coating is applied to the tempered glass surface to prevent fingerprints, dust, cosmetics, etc. from sticking to the surface and to wipe it clean.
*Hardness 9H
*99.9% high transparency
[How to install]
1. Wipe the smartphone screen clean with a cleaner to remove dust and fingerprints.
Peel off the release sheet of the tempered glass film and align it with the outer frame of the main unit with the adhesive side facing down.
*Be careful of the direction in which the film is attached.
3. Align the tempered glass film precisely with the four corners of the LCD surface.
4. Gently press the four corners of the tempered glass film to check for any misalignment. If there is any misalignment, peel it off and reapply.
5. Firmly attach the film to the device.
*Product specifications and design are subject to change without prior notice for improvement.