廠商詳情
My Case Shop
地址 | 6-27-45 THE KINDAI 20 SHINJUKU Bldg.3F Shinjuku Shinjukuku Tokyo, 日本郵編:160-0022 |
---|---|
負責人姓名 | Ally Won |
年銷售額 | JPY 840,000,000 |
公司人數 | 23 |
網址 | |
SNS |
SD商品編號:5852582
詳情 | 價格 & 數量 | ||
---|---|---|---|
S1 |
清楚。
Original text before translation
クリア
(MT11724Z1C)
JAN:4589753007246
|
(MT11724Z1C)
JAN:4589753007246
批發價: 僅限會員查看
1個/組
有庫存
|
尺寸 |
---|
6.4 x 14.1 x 0.033 厘米
8 g [兼容型号]. Xperia(TM) XZ1 Compact SO-02K |
商品規格 |
---|
描述
*厚度为0.33mm 0.33毫米的高质量玻璃,圆边处理,使其能够抵抗侧面冲击,触感光滑。 *薄而坚固的尖端保护膜 玻璃经过特殊处理,即使破碎也不会散落,防止碎片对设备本身造成伤害或损坏。这是一个注重安全的产品。 *圆边处理 圆边处理实现了手持时的平滑边缘,提供了一个优雅的外观和持有的感觉,就像它是一个整体。圆边处理实现了握在手中时的平滑边缘,提供了优雅的外观和握持感,仿佛与玻璃防碎功能融为一体。 *防指纹处理 在钢化玻璃表面涂有防指纹涂层,防止指纹、灰尘、化妆品等粘附。 *整个表面都有粘性薄膜 全表面胶膜的特点是,当完全粘在表面时,它更牢固,更不可能开裂。它还具有防止气泡形成的结构,并且易于安装。 *硬度9H [如何安装] 1. 用清洁剂将智能手机屏幕擦拭干净,以去除灰尘和指纹。 撕下钢化玻璃膜的剥离片,将其与主机的外框对齐,粘合面朝下。 *注意薄膜的连接方向。 3. 将钢化玻璃膜准确地与LCD表面的四个角对齐。 如果有任何错位,请剥下薄膜并重新贴上。 确认贴膜和设备屏幕的四个角重叠后,轻轻按压钢化玻璃贴膜的中心,贴膜会逐渐贴在屏幕上。(不用擦就能自然附着。) 6. 轻轻地从中心向边缘按压未胶合的区域,如果有气泡形成,将其向外推。 如果表面形成了波浪纹,请用塑料板压回去,否则会随着时间的推移自然消失。 |
更多
寄送方式 | 預計抵達時間 |
---|---|
Sea Mail | 從 06月18日 到 08月22日 |
Air Mail | 從 05月31日 到 06月04日 |
EMS | 從 05月30日 到 06月04日 |
Pantos Express | 從 06月03日 到 06月06日 |
DHL | 從 05月30日 到 06月03日 |
UPS | 從 05月30日 到 06月03日 |
FedEx | 從 05月30日 到 06月03日 |
某些交易條件可能僅適用於日本 |
相同分類的其他商品:
0.33毫米的高质量玻璃,圆边处理,使其能够抵抗侧面冲击,触感光滑。
*薄而坚固的尖端保护膜
玻璃经过特殊处理,即使破碎也不会散落,防止碎片对设备本身造成伤害或损坏。这是一个注重安全的产品。
*圆边处理
圆边处理实现了手持时的平滑边缘,提供了一个优雅的外观和持有的感觉,就像它是一个整体。圆边处理实现了握在手中时的平滑边缘,提供了优雅的外观和握持感,仿佛与玻璃防碎功能融为一体。
*防指纹处理
在钢化玻璃表面涂有防指纹涂层,防止指纹、灰尘、化妆品等粘附。
*整个表面都有粘性薄膜
全表面胶膜的特点是,当完全粘在表面时,它更牢固,更不可能开裂。它还具有防止气泡形成的结构,并且易于安装。
*硬度9H
[如何安装] 1.
用清洁剂将智能手机屏幕擦拭干净,以去除灰尘和指纹。
撕下钢化玻璃膜的剥离片,将其与主机的外框对齐,粘合面朝下。
*注意薄膜的连接方向。 3.
将钢化玻璃膜准确地与LCD表面的四个角对齐。
如果有任何错位,请剥下薄膜并重新贴上。
确认贴膜和设备屏幕的四个角重叠后,轻轻按压钢化玻璃贴膜的中心,贴膜会逐渐贴在屏幕上。(不用擦就能自然附着。) 6.
轻轻地从中心向边缘按压未胶合的区域,如果有气泡形成,将其向外推。
如果表面形成了波浪纹,请用塑料板压回去,否则会随着时间的推移自然消失。
0.33mm high quality glass with rounded edge processing makes it resistant to side impact and smooth to the touch.
*Thin and strong cutting-edge protective film
The glass is specially treated so that it will not scatter even if it breaks, preventing injury or damage to the device itself from the shards. This is a product that pays attention to safety.
*Round edge processing
The rounded edge processing realizes a smooth edge when held in the hand, providing an elegant appearance and holding feeling as if it were one with the handset body, as well as glass shatterproofing function.
*Anti-fingerprint processing
Anti-fingerprint coating is applied to the tempered glass surface to prevent fingerprints, dust, cosmetics, etc. from sticking.
*Adhesive film on the entire surface
The feature of the all-surface adhesive film is that it is stronger and less likely to crack when fully adhered to the surface. It also has a structure that prevents air bubbles from forming and is easy to install.
*Hardness 9H
[How to install]
1. Wipe the smartphone screen clean with a cleaner to remove dust and fingerprints.
Peel off the release sheet of the tempered glass film and align it with the outer frame of the main unit with the adhesive side facing down.
*Be careful of the direction in which the film is attached.
3. Align the tempered glass film precisely with the four corners of the LCD surface.
4. Gently press the four corners of the tempered glass film to check for any misalignment. If there is any misalignment, peel off the film and reapply.
5. After confirming that the film and the four corners of the device screen are overlapped, gently press the center of the tempered glass film, and the film will gradually adhere to the screen. (It will adhere naturally without rubbing.)
6. Gently press the unglued area from the center to the edge, and if air bubbles have formed, push them outward.
7. If a wave pattern has formed on the surface, press it back on with a plastic plate or it will disappear naturally over time.