以批發價從日本進口马桶盖/座圈

*In toilet bowls with a sensor behind the toilet seat, this product should be installed so as not to block the sensor. The sensor may not respond or may cause a malfunction.
*This product cannot be used on a toilet seat with a rough surface.
*Dust or dirt on the toilet seat may weaken the adsorption.
*If dust or dirt adheres to the adsorbent surface and makes it difficult to adhere, wipe the adsorbent surface with water and dry it well before attaching.
*Because this product is thick, the lid may fall down if the toilet seat lid is opened with the product attached. In this case, please use it with your hand. Also, depending on the thickness, the toilet seat lid may not close tightly.
*The size of this product cannot be adjusted by cutting.
*When using a heated toilet seat, use it at a low temperature or with the switch turned off.
*Please turn it over once a week to let it air dry.
*If detergent ingredients remain on the toilet seat or adsorbing surface, the adsorption may weaken or the product may stick strongly.
*If the adsorption part adheres to the toilet seat, wipe it off with a wet rag.
*Do not store the adsorption surfaces of the back side of the product on top of each other. They may adhere to each other and the adsorption surface may peel off.
*Do not use the product for any purpose other than the above.

[Care and Storage]
*When machine washing, place in a net and wash on low water flow.
*Do not use a dryer.
*It can be washed and used repeatedly, but replace it when the adsorption on the back side becomes weak.
*Do not use bleach as it may cause color fading or discoloration.
*Do not use fabric softener, as it may cause the adsorption capacity to decrease.
*Store in a well-ventilated place away from high temperature, high humidity, and direct sunlight.
*Store the product in a humid place or in a shade-dried condition, or in a place with high humidity, or with water droplets on the adsorption surface, which may cause mildew.