廠商詳情
LOVELY PET TRADING CO.,LTD
地址 | 6-20 MATSUO-CHO KADOMA-SHI Osaka, 日本郵編:571-0044 |
---|---|
負責人姓名 | Masaki Hyoudou |
年銷售額 | JPY 25,993,000,000 |
公司人數 | 279 |
網址 |
SD商品編號:8140523
詳情 | 價格 & 數量 | ||
---|---|---|---|
S1 |
[Petio] 训练有素的狗狗厕所 圆形白色普通屋顶
Original text before translation
[ペティオ] トイレのしつけが出来る ドッグルームサークル ホワイト レギュラー専用屋根面
(-)
JAN:4903588249884
|
(-)
JAN:4903588249884
批發價: 僅限會員查看
1個/組
售罄
|
尺寸 |
---|
独立包装尺寸:(宽)795 x(高)645 x(深)75(毫米)
|
商品規格 |
---|
描述
可根据用途打开/关闭*、连接/分离! 每个卫生间和起居室都可以自由开合。 附带易于安装和拆卸的附件。 [使用方法] [安装方法] *小心不要让手指或爪子卡在附件中。 *请将附件与墙壁保持至少 5 厘米的距离,否则可能会刮伤墙壁。 *打开/关闭或安装/拆卸屋顶面时,请勿用手触摸屋顶面。 (1)将屋顶面分别放在卫生间*和起居室的木架上。 (2) 滑动锁扣,将顶盖表面的突出部分插入木框的底部。 (3) 将钢丝插入附件的孔中。 (4)将附件下部弯曲至圆圈内侧,将附件螺栓插入孔中,并紧固到底。 [在拆除隔断门的情况下安装车顶面时] (1) 用内六角扳手卸下隔断门木框上的两颗螺钉。(1) 使用内六角扳手卸下隔断门木框上的两颗螺钉。 (2) 将隔断门的木框装入木框长边的凹槽后,安装顶面。(2) 将隔断门的木框装入长边木框的凹槽后,安装屋顶面。 *请勿将顶面悬挂在墙壁上,以免掉落。 *打开和关闭顶盖时,请务必将手放在地板上,以免受伤或损坏地板、墙壁等。 |
更多
寄送方式 | 預計抵達時間 |
---|---|
Sea Mail | 從 07月09日 到 09月10日 |
Air Mail | 從 06月21日 到 06月25日 |
EMS | 從 06月20日 到 06月25日 |
Pantos Express | 從 06月24日 到 06月27日 |
DHL | 從 06月20日 到 06月24日 |
UPS | 從 06月20日 到 06月24日 |
FedEx | 從 06月20日 到 06月24日 |
某些交易條件可能僅適用於日本
*请注意,我们不向冲绳*和偏远岛屿送货。
*由于订单状态、库存状态等原因,产品供应可能会有变化(波动)。 由于订单状态、库存状态等原因,产品供应可能会有变化(波动)。 *我们不接受延期交货,所以如果商品缺货,我们将取消您的订单。 |
每个卫生间和起居室都可以自由开合。
附带易于安装和拆卸的附件。
[使用方法]
[安装方法]
*小心不要让手指或爪子卡在附件中。
*请将附件与墙壁保持至少 5 厘米的距离,否则可能会刮伤墙壁。
*打开/关闭或安装/拆卸屋顶面时,请勿用手触摸屋顶面。
(1)将屋顶面分别放在卫生间*和起居室的木架上。
(2) 滑动锁扣,将顶盖表面的突出部分插入木框的底部。
(3) 将钢丝插入附件的孔中。
(4)将附件下部弯曲至圆圈内侧,将附件螺栓插入孔中,并紧固到底。
[在拆除隔断门的情况下安装车顶面时]
(1) 用内六角扳手卸下隔断门木框上的两颗螺钉。(1) 使用内六角扳手卸下隔断门木框上的两颗螺钉。
(2) 将隔断门的木框装入木框长边的凹槽后,安装顶面。(2) 将隔断门的木框装入长边木框的凹槽后,安装屋顶面。
*请勿将顶面悬挂在墙壁上,以免掉落。
*打开和关闭顶盖时,请务必将手放在地板上,以免受伤或损坏地板、墙壁等。
Each of the toilet space and living space can be opened and closed freely.
Easy to attach and detach attachments are included.
[How to use]
[How to install]
*Be careful not to get your fingers or claws caught in the attachment.
*Please keep the attachment at least 5cm away from the wall, as it may scratch the wall.
*Keep your hands away from the roof surface when opening/closing or attaching/detaching the roof surface.
(1)Place the roof surface on the wooden frame of the toilet space* and the living space respectively.
(2)Slide the lock and insert the protruding part of the roof surface into the underside of the wooden frame.
(3) Insert the steel wires into the holes in the attachments. (4 places)
(4)Bend the lower part of the attachment to the inside of the circle, insert the attachment bolt into the hole, and tighten it firmly to the end.
[When attaching the roof surface with the partition door removed]
(1) Remove the two screws from the wooden frame of the partition door using an Allen wrench. The wooden frame and the steel wire will come off. *Be careful not to damage the wooden frame.
(2) After fitting the wooden frame of the partition door into the recess of the wooden frame on the long side, attach the roof surface. Be sure to use the door with both roof surfaces attached.
*Do not leave the roof surface hanging against the wall, as it may fall down.
*Be sure to keep your hands on the floor when opening and closing the roof to avoid injury or damage to the floor, walls, etc.