
厂商详情
Lin co;Ltd.
地址 | 1-3-6 sannomiya kobe Hyogo, 日本邮编:650-0021 |
---|---|
负责人姓名 | weirong lin |
年收 | 不显示 |
公司人数 | 不显示 |
网址 |
SD商品编号:13714555
详情 | 价格 & 数量 | ||
---|---|---|---|
S1 |
1. 金(内径 1.0 毫米)
![]()
1.ゴールド(内径1.0mm)
(stain-kiso21-50p)
|
(stain-kiso21-50p)
批发价: 仅限会员
1点/组
有库存
|
|
S2 |
银(内径 1.0 毫米)
![]()
2.シルバー(内径1.0mm)
(stain-kiso21-50p)
|
(stain-kiso21-50p)
批发价: 仅限会员
1点/组
有库存
|
|
S3 |
3. 金(内径 0.8 毫米)
![]()
3.ゴールド(内径0.8mm)
(stain-kiso21-50p)
|
(stain-kiso21-50p)
批发价: 仅限会员
1点/组
有库存
|
|
S4 |
银(内径 0.8 毫米)
![]()
4.シルバー(内径0.8mm)
(stain-kiso21-50p)
|
(stain-kiso21-50p)
批发价: 仅限会员
1点/组
有库存
|
|
S5 |
5. 金(内径 0.7 毫米)
![]()
5.ゴールド(内径0.7mm)
(stain-kiso21-50p)
|
(stain-kiso21-50p)
批发价: 仅限会员
1点/组
有库存
|
|
S6 |
银色(内径 0.7 毫米)
![]()
6.シルバー(内径0.7mm)
(stain-kiso21-50p)
|
(stain-kiso21-50p)
批发价: 仅限会员
1点/组
有库存
|
出货时期 |
---|
约1周
|
尺寸 |
---|
|
商品规格 |
---|
描述
*仅出售部件。请注意,珠子不包括在内。*请注意,珠子不包括在内。 [项目描述] 这是一个 U 形金属配件,可用作项链的末端部件,以铁丝、线或尼龙线等为芯线。 适用于尼龙线和铁丝 将填缝球(碎球)和金属配件穿过穿有珠子的线端,沿 U 形绕一圈后返回。 穿过几颗珠子,拧紧并修整。 用钳子压碎填缝球,以固定线头。 完成所有悬垂的线。 *如果是珠线,请根据作品决定如何固定。 [产品规格] *总长度:约 4.5 厘米-5.0 厘米 *穿线孔:约 1 毫米/0.8 毫米/0.7 毫米 *存在一定的个体差异。请谅解。 *颜色:金色/银色 *件数:50 件50 件 *材质: 不锈钢(金色为 K18 真空电镀不锈钢(金色为 K18 真空电镀) *并非所有人都会有过敏反应。 *重要提示~请仔细阅读。~* **由于本产品为海外产品,且为手工制作,因此尺寸可能会有细微的个体差异。 ***由于是海外产品,可能会有细小划痕、污渍、缺口或变形。 *即使是相同的颜色,也可能因收到的批次不同而在颜色上存在细微差别。 *价格可能因到货时间不同而略有差异。 *我们已尽量使照片接近商品的实际颜色,但根据您的电脑或显示器的不同,颜色可能会略有差异。 |
更多
配送方法 | 估计到达 |
---|---|
Sea Mail | 从 2025年11月03日 到 2026年01月05日 |
Air Mail | 从 2025年10月16日 到 2025年10月20日 |
EMS | 从 2025年10月15日 到 2025年10月20日 |
Pantos Express | 从 2025年10月17日 到 2025年10月22日 |
DHL | 从 2025年10月15日 到 2025年10月17日 |
UPS | 从 2025年10月15日 到 2025年10月17日 |
FedEx | 从 2025年10月15日 到 2025年10月17日 |
某些交易条件可能仅适用于日本 |
[项目描述]
这是一个 U 形金属配件,可用作项链的末端部件,以铁丝、线或尼龙线等为芯线。
适用于尼龙线和铁丝
将填缝球(碎球)和金属配件穿过穿有珠子的线端,沿 U 形绕一圈后返回。
穿过几颗珠子,拧紧并修整。
用钳子压碎填缝球,以固定线头。
完成所有悬垂的线。
*如果是珠线,请根据作品决定如何固定。
[产品规格]
*总长度:约 4.5 厘米-5.0 厘米
*穿线孔:约 1 毫米/0.8 毫米/0.7 毫米
*存在一定的个体差异。请谅解。
*颜色:金色/银色
*件数:50 件50 件
*材质: 不锈钢(金色为 K18 真空电镀不锈钢(金色为 K18 真空电镀) *并非所有人都会有过敏反应。
*重要提示~请仔细阅读。~*
**由于本产品为海外产品,且为手工制作,因此尺寸可能会有细微的个体差异。
***由于是海外产品,可能会有细小划痕、污渍、缺口或变形。
*即使是相同的颜色,也可能因收到的批次不同而在颜色上存在细微差别。
*价格可能因到货时间不同而略有差异。
*我们已尽量使照片接近商品的实际颜色,但根据您的电脑或显示器的不同,颜色可能会略有差异。
[item description].
This is a U-shaped metal fitting that can be used as an end part for necklaces using tegus, thread, nylon coated wire, etc. as the core thread.
For nylon coated wire and tegus
Pass a caulking ball (crushed ball) and metal fittings through the thread end through which beads are threaded, and make a loop along the U-shape and return.
Thread through several beads and tighten and trim.
Crush the caulk ball with pliers to secure the thread.
Finish off any overhanging thread.
*In case of bead thread, please decide how to fasten the thread depending on the work.
[Product Specifications]
*Total length: approx. 4.5cm-5.0cm
*Threading hole: approx. 1mm/0.8mm/0.7mm
*There is a certain amount of individual difference. Please understand.
*Color: Gold / Silver
*Number of pieces: 50 pieces
*Material: Stainless steel (gold is K18 vacuum plated) *Not all people will have allergic reactions.
*Important Notice~Please read carefully. ~*
**Since this is an overseas product and handmade, there may be slight individual differences in size.
***Because it is an overseas product, there may be small scratches, stains, chips, or distortions.
*There may be slight differences in the color of the product depending on the lot in which it was received, even if it is the same color.
*Prices may vary slightly depending on the time of arrival.
*We have tried to make the photos as close to the actual color of the item as possible, but there may be slight differences in color depending on your computer or monitor.