Vendor Profile
JANE
| Address | 2-7-1 Nippombashinishi Osakashinaniwaku Osaka, JAPAN ZIP:556-0004 |
|---|---|
| Representative Name | MOTOTSUGU AOKI |
| Annual Revenue | JPY 600,000,000 |
| No. of Employees | 17 |
People Also Searched
Other items from this category
SD item code:11394266
| Detail | Price & Quantity | |||
|---|---|---|---|---|
| This product is currently unavailable | ||||
| Shipping Date |
|---|
|
About 1 week
|
| Dimensions |
|---|
|
|
| Specifications |
|---|
|
Country of manufacture: China
Material / component: plastic
Year of manufacture: 2023
|
Description
| Popcorn pens become firmer when the inked area is heated. An embossing heater is best for heating. A hair dryer of 1200w or higher can also be used to make it firmer. (It is necessary to heat the inked area for at least 1 minute with a temperature of 80°C or higher and close to about 1 cm to the inked area.) [How to use] Wet the popcorn pen to a thickness of about 1 mm on the area you want to make firmer. When the surface of the area becomes dry, heat the pen with an embossing heater at a distance of 10 cm from the area to be heated. When it stops rising, it is done. *Be careful not to heat it more than that, as it will burn. *After puffing, do not stack the pieces immediately, as they tend to stick together. If the temperature of the embossing heater (dryer, etc.) is low, the product may not puff up. |
More
| Shipping Method | Estimated Arrival |
|---|---|
| Sea Mail | From Jul.7th 2025 to Sep.8th 2025 |
| Air Mail | From Jun.19th 2025 to Jun.23rd 2025 |
| EMS | From Jun.18th 2025 to Jun.23rd 2025 |
| Pantos Express | From Jun.20th 2025 to Jun.25th 2025 |
| DHL | From Jun.18th 2025 to Jun.20th 2025 |
| UPS | From Jun.18th 2025 to Jun.20th 2025 |
| FedEx | From Jun.18th 2025 to Jun.20th 2025 |
|
Some trading conditions may be applicable only in Japan.
*Because of the limited quantity, depending on the timing of your order
Please note that the product may be sold out depending on the timing of your order. *In the case of Hokkaido and remote islands, shipping fees may be charged separately from those shown in the shipping table. Please understand that before purchasing. |
Other items from this category:
An embossing heater is best for heating.
A hair dryer of 1200w or higher can also be used to make it firmer.
(It is necessary to heat the inked area for at least 1 minute with a temperature of 80°C or higher and close to about 1 cm to the inked area.)
[How to use]
Wet the popcorn pen to a thickness of about 1 mm on the area you want to make firmer.
When the surface of the area becomes dry, heat the pen with an embossing heater at a distance of 10 cm from the area to be heated.
When it stops rising, it is done.
*Be careful not to heat it more than that, as it will burn.
*After puffing, do not stack the pieces immediately, as they tend to stick together.
If the temperature of the embossing heater (dryer, etc.) is low, the product may not puff up.